Ramsey-winch ATV-2500 Manuel d'utilisateur

Ramsey Winch CompanyOWNER'S MANUALATV Electric WinchModel ATV2500CongratulationsYou have purchased the finest winch available in its service clas

ATV2500 (Wireless Remote)10341281451013715126911161786259103114Hardware Kit

ATV2500 (Wireless Remote) Parts List ITEMNO.12345678910111213141516QTY.1111111111111111PARTNO.25121425121225119125119225119325121325123625119525119625

Electrical Schematic (Manual Switch)SOLENOID ASS’Y.BLACK W/ YELLOWSTRIPE MOTORLEAD (Item #12-5)REDBATTERY LEAD(Item #12-1)BLACKBATTERY LEAD(Item #12-2

Manual Switch OperationRotation of the switch clockwise spools cable“IN” and counterclockwise spools cable “OUT”.Manual Switch InstallationThe Remote

Installing the Manual SwitchCAUTION: BE SURE THAT NO WIRE CONNECTIONS ARE INCONTACT WITH EITHER THEATV FRAME OR WITH EACHOTHER AS A DIRECT SHORT WILL

15NOTES

ATV2500 (Manual Switch)1012456377111265REDREDREDBLACKBLACKBLACKBLACKW/STRIPE94121393104581172126WiringKit1Hardware KitSwitchAssy3816

ATV2500 (Manual Switch) Parts List ITEMNO.12345678910111213QTY.1111111111111PARTNO.2512142512122511912511922511932512132510752511952511962512492997272

Electrical Schematic (Rocker Switch)SOLENOID ASS’Y.BLACK W/ YELLOWSTRIPE MOTORLEADREDBATTERY LEADBLACKBATTERY LEADBATTERYYELLOW WIREBLACK MOTORLEADGRE

Rocker SwitchOperationPress Rocker Switchtoward “IN” position tospool cable “IN” andpress Rocker Switchtoward “OUT” positionto spool cable “OUT”.Rocke

Safety Precautions To GuardAgainst Possible Injury...A. Keep yourself and others a safe distance tothe side of the cable when pulling under load.B.

3. Push the Green, Red, and Yellow wiresthrough the back of the switch housing.4. Install the Gasket onto the Rocker Switch.5. Connect Yellow wire (it

21NOTES

14931045812721161Hardware KitATV2500 (Rocker Switch)101244233111265REDBLACKBLACKW/STRIPE9413SolenoidWiringKitSwitchAssy38227BLACK1SwitchWiringKit12

ATV2500 (Rocker Switch) Parts List ITEMNO.1234567891011121314QTY.11111111111111PARTNO.2512142512122511912511922511932512132512362511952511962512342575

RAMSEY WINCH COMPANYP.O. BOX 581510 TULSA, OKLAHOMA 74158-1510 USA PHONE: (918) 438-2760 FAX: (918) 438-6888http://www.ramsey.comOM-914061-010

Never connect the hook back to the cable. Thiscauses cable damage. Always use a sling orchain of suitable strength.Observe your winch while winching

Rotating the Motor on your ATVWinchThe ATV winch has the motor studs and leadspositioned on the end of the motor aligned verti-cally. If you need to r

3. Remove the bolts that hold the end plate to themotor end housing. Lift off the end plate andtake the nuts and washers out of the mountingfeet. Set

6. Replace the gears into the motor end housing,fitting the input sun gear over the motor shaft.The planetary gear carrier should be seated sothat the

Winch OperationThe winch clutch allows rapid unspooling of thewire rope for hooking onto the load or anchorpoint. The clutch is operated by the shifte

ATV2500 Trouble Shooting GuideCONDITIONS POSSIBLE CAUSE CORRECTIONMOTOR RUNS IN ONLY ONE Defective solenoid or stuck solenoid. Jar solenoid assembly

Electrical Schematic (Wireless Remote)ON/OFFINOUTPrograming instructions: Press and hold membrane below,press ON/OFF button on transmit ter for 3 sec